AutoCAD Guides

Using Xref first step! How to attach Xref?

In the previous post about Xrefs we talked about the definition of external references and what are they used for. Here we will learn how to properly attach an Xref and what are the different options.

How to attach Xref?

Before we attach drawing we need to have it, so in this example we will use a drawing of walls, doors and windows of house for our base.Main floor.JPG

Now for example we will make new drawing called Furniture in which we will put some of the furniture of the house. There are two ways to attach DWG file:

  1. We go to Insert ribbon then click on Attach. attach.JPG
    Window will pop up here we find the drawing we want to attach and click Open.
    Note: Don’t forget to select File type at the bottom!Open.JPGXr.JPG
  2. Second method is preferred by me. Here we will type in command line “XR” and hit enter. Now a window will pop up, here we can see all the attached external references and we can work with them. Since we have no references attached we go to upper left corner and click on the small arrow there we can see Attach DWG..  and click on it. New window will pop up here we select our drawing and hit Open.attach-dwgopen-dwg
    Note: As you can see we can attach not only DWG files but Images, DWF, DGN etc.

After clicking on Open an Attach External Reference window will pop up. Here we will go through all the options step by stepAttach external.JPG

  1. Preview – Here we can see a preview of the drawing that is going to be attached
  2. Browse..- If we have missclicked we can go and browse for another drawing
  3. Reference type – We have two options Attachment and Overly you can find details in Xref Attach or Overly? What is the difference? , but long story short if we use Overly we don’t see nested drawings if we use Attachment we see all nested drawings.
  4. Show details – Nothing interesting here only the file pathShow details.JPG
  5. Scale – Here we can scale our reference drawing by X, Y and Z or we can choose Specify On-Screen and specify the scale dynamically.  For our example we won’t touch anything because we want the drawing to be the same size as the original.
  6. Insertion point – We can choose specific insertion point by X, Y and Z or we can choose one On-screen. We will again leave it as it is.
  7. Path type – Here we have 3 options – No path, Full Path and Relative path. In post Xref – choosing our Path Type you can have detailed explanation of all Path Types.
  8. Rotation – We are asked to choose rotation for our reference if we want one, we can also rotate it On-screen. For the example we will leave it to 0.
  9. Block unit – This shows us the scale factor of our xref. Since both of the drawings are set to feet scale factor is 1.

Now we click OK and we will have our main floor drawing attached to furniture dwg.
Don’t worry if you messed up with some of the options you can always correct them in the drawing!
We will have to type “zoom” command (or just “Z“) and then “Extents” to see our x ref attached and we can start adding some furniture.Xref attacged.JPG

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s